Rebooting The Mp Or Cp Card; Setting The Clock - Paradyne CPX-1000 User Manual

1000-A2-GB22-10
Rebooting the
MP or CP Card
Step 1
Step 2
Step 3
Setting the
Clock
Step 1
Step 2
Step 3
June 2005
You can reboot either the MP card or the standby CP card. Before
rebooting the standby CP card, put it to the Locked state
(Changing CP Card States
Warning
Rebooting the MP card interrupts service.
To reboot the MP or CP card:
Click either the MP or CP card icon from the Tree or Shelf views.
Select Reboot from the Services menu. A prompt appears, asking
if you want to continue.
Click Yes to reboot.
If the CPX-1000 is stored for an extended period of time and the
ambient temperature changes while it is in storage, the CPX-1000
internal clock may require adjustment.
To change the time configuration:
Note
If MP is not selected, Time Configuration is grayed out.
Select MP at the Shelf View or Tree View.
Select Services from the menu bar or right-click the MP card.
Select Time Configuration. The Set CPX Time window
displays the current time setting
11. Maintenance and Services
on page 11-9).
(Figure 11–3).
11-5