Hot Swapping Mp Card - Paradyne CPX-1000 User Manual

11. Maintenance and Services
Hot Swapping
MP Card
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
11-12
To hot swap the MP card:
Back up the current CPX-1000 database
Database on page 11-2).
Click the MP card from the Tree or Shelf views.
Click the MP card from the Tree or Shelf views and select Remove
Resources from the Configuration menu.
– Or –
Right-click the MP card from the Tree or Shelf views and select
Remove Resources from the pop-up menu.
A prompt appears, asking if you want to remove all resources
associated with the card.
Click Yes. The card is removed from the Tree and Shelf views.
Remove the physical MP card, followed by its corresponding
transition card, from the CPX-1000 shelf.
Insert the new transition card, followed by the MP card, and lock
them in place using the card ejectors.
Select Refresh CPX from the File menu. The new MP card
appears in the Tree and Shelf views.
Restore the CPX-1000 configuration
on page 11-3).
1000-A2-GB22-10
(Backing Up CPX-1000
(Restoring CPX-1000 Database
June 2005