Statistics - Paradyne CPX-1000 User Manual

10. Alarms, Events, and Statistics

Statistics

10-4
With JetCraft, you can graph various levels of error or performance
statistics based on the element you have selected. Only online
graphing (no printing) is available for current data. Online graphs
are charted over a user-defined interval, up to fifteen minutes.
Error graphs display absolute and relative values. Clicking Show
marks the initial absolute value. Clicking Reset freezes the
absolute value, and starts marking new relative values.
Subsequent resets add the last relative value to the absolute value,
and start marking new relative values
are in minutes.
There are different methods to poll various levels of error or
performance statistics based on the element you select. To poll
statistics on the CP performance, go to
page 10-10. For statistics on CPX-1000, T-1 ports, and MP card, go
to Graphing Statistics
the following:
Interface Groups (page 10-11)
Network Protection Group (page 10-12)
PSTN Protection Group (page 10-13)
STS-1 ports (page 10-14)
IADs (page 10-16)
(Figure
Polling CP Performance
on page 10-17. For other elements, refer to
1000-A2-GB22-10
10–4). These values
on
June 2005