Creating Iads; Creating Voiceband Iads Using The Wizard - Paradyne CPX-1000 User Manual

1000-A2-GB22-10

Creating IADs

Creating
Voiceband IADs
Using the Wizard
Step 1
June 2005
Each IAD has a VPI and VCI assigned to it. An IAD group is a set
of IADs with the same VCI but different VPIs. The maximum
number of active calls supported in an IAD Group is limited to 63.
Note
You can provision more than 63 ports in an IAD group;
however, only 63 of those ports can have active calls on
them at one time.
Depending on your preference and experience, you can choose the
following methods when creating an IAD:
Using IAD Wizard provides a step-by-step instruction to set
up an IAD. This method is suited for new or less experience
users.
Using Create IAD, better suited for experience users,
enables the IAD creation in an one-shot approach.
To create voiceband IADs using the wizard:
Select IAD Wizard from the Configuration menu.
– Or –
Right-click on the Tree View or Map View and select IAD
Wizard from the pop-up menu.
– Or –
Click (IAD wizard icon) on the toolbar.
The IAD Creation Wizard–Introduction screen appears
(Figure 9–6).
9. IAD Profiles and IADs Provisioning
9-9