1000-A2-GB22-10
Step 8
Step 9
Step 10
Step 11
Step 12
June 2005
Select the Protection Group that the IAD is assigned from the ATM
Protection Group drop-down list.
Type the VPI value between 0 to 255 in the VPI field.
Type the VCI value in the VCI field. This identifies the
subscriber-specific virtual circuit between the CPX-1000 and the
ATM network.
If VPI is 0, then the VCI range is 32 to 1023.
If VPI is >0, then the VCI range is 0 to 1023. (Refer to
Chapter
5,
CPX-1000
Select either ATM or Frame Relay from the Transport
drop-down list. Transport selections are dependant upon the IAD
Profile.
Click Next. The Reference Configuration screen appears
(Figure
9–11).
Figure 9–11. IAD Creation Wizard–Reference
Configuration Screen
9. IAD Profiles and IADs Provisioning
Configuration, for VCI setting.)
9-13