Launching Integrated Monitor - Paradyne CPX-1000 User Manual

12. Integrated Monitoring
Table 12–1.Integrated Monitor Operation
Entities
GR-303 Interface Groups
Protection Groups
(Network and PSTN)
CPX-1000
Launching
Integrated
Monitor
12-2
Monitoring...
It provides the physical mapping of the TMC/EOC/
TMCPPS/EOCPPS with the DS1 # to an IG (i.e., T1 IG) and
the physical port to logical channel (i.e., STS IG). The Lock
symbol indicates that the particular channel is down as it has
been locked.
the operational state of each TMC and EOC (i.e., Up or
Down)
the standby state of each TMC and EOC (i.e., active or
standby)
the redundancy state of each TMC and EOC (i.e., primary or
secondary)
the operational state of the Protection Groups (i.e., Up or
Down)
the standby state of the Protection Groups (i.e., active or
standby)
the redundancy state of the Protection Groups (i.e., primary
or secondary)
the connection status of each entity
Integrated Monitor uses colors as visual cues to indicate the
different states of each entity: green for active, blue for standby,
and gray indicates that connection is down.
To launch the Integrated Monitor:
Click the CPX-1000, and select Integrated Monitoring from
the Configuration menu.
– Or –
Right-click the CPX-1000, and select Integrated Monitoring
from the pop-up menu.
The Integrated Monitor view similar to
separate window.
1000-A2-GB22-10
Figure 12–1 opens in a
June 2005