Paradyne CPX-1000 User Manual page 74

6. Protection Group Provisioning
Step 4
Step 5
Step 6
Step 7
Step 8
6-10
Figure 6–10. Protection Group Manager Window
Select Unassigned from the Slot/Port drop-down list for the
Secondary Member.
Select Locked from the Admin State drop-down list.
Repeat Step 5 for the Primary Member.
Note
The unassigned list does not appear in the Slot/
Port drop-down list in the Primary Member area
until after you select unassigned for the Secondary
Member. This selection ensures that the primary port
(Primary Member) remains assigned when the
secondary port is unassigned.
Click OK.
Select Refresh CPX from the File menu to view your changes.
1000-A2-GB22-10
June 2005