Re-Connecting To Jetcraft; Where To Go Next; Removing Jetcraft - Paradyne CPX-1000 User Manual

1000-A2-GB22-10
Re-connecting
to JetCraft
Where to Go
Next
Removing
JetCraft
Step 1
Step 2
June 2005
JetCraft automatically times out after a period of inactivity. When
the connection is lost, the following dialog box appears:
Click Re-login. Then type your user ID and password in their
respective fields when the JetCraft Login window reappears.
You can learn about working with the JetCraft Main window
(Chapter 3, JetCraft Basic
menu options on the JetCraft Main window
Menu Map).
You can also use the JetCraft Main screen to configure the
CPX-1000 shelf in the following order:
Configuring CPX-1000 (see
Configuration) or creating user access (see
Administration and User
Provisioning Protection Groups
Group Provisioning)
Provisioning Interface Groups
Provisioning IAD Profiles and ISDN Port Templates
(Chapter 9, IAD Profiles and IADs
Provisioning IADs
Statistics)
To remove an earlier version of JetCraft:
Click the Start button > Settings > Control Panel.
Double-click Add/Remove Programs. The Add/Remove
Programs Properties screen appears.
Operations), or see an overview of all the
(Appendix
Chapter 5, CPX-1000
Management)
(Chapter 6, Protection
(Chapter 7, Interface
Provisioning)
(Chapter 10, Alarms, Events, and
2. JetCraft Installation
A, JetCraft
Chapter 4,
Groups)
2-9