Paradyne CPX-1000 User Manual page 76

7. Interface Groups
Table 7–1. Interface Group Configuration Parameters Summary
Parameters
Name
LDS
Model
Primary DS1
Secondary DS1
Creating T1
Interface
Groups
Step 1
7-2
The Modify operation for T1 CAS consists only of assigning and
unassigning DS1s.
Description
The Interface Group name. The name is used for error reporting and
to identify the interface group and assign subscribers.
The Local Digital Switch. The name of the host switch to which the
interface group connects.
The host switch model (e.g., Lucent 5ESS, Siemens EWSD).
The primary DS1 number used for the primary TMC and EOC
channels.
The secondary DS1 number you want to use for the secondary TMC
and EOC channels.
To create a T1 Interface Group:
Click on the Tree View, the right-hand pane changes to the
Interface Group tabular view
1000-A2-GB22-10
(Figure 7–1).
June 2005