Paradyne CPX-1000 User Manual page 104

7. Interface Groups
Step 2
Step 3
Step 4
Step 5
7-30
Select the name of the Interface Group that you want to switch.
Select Switchover TMC from the Configuration menu.
– Or –
Right-click the highlighted selection and select Switchover EOC
from the pop-up menu.
The following dialog box appears.
Select the type of switchover you want to perform.
Normal means that the switchover takes place under
normal working conditions (i.e., TMC/EOC is up).
Forced means that the switchover takes place even when the
standby TMC/EOC is down.
Click OK.
Note
You can launch the Integrated Monitor to view the
status of the switchover
Monitoring).
(Chapter 12, Integrated
1000-A2-GB22-10
June 2005