Paradyne CPX-1000 User Manual page 72

6. Protection Group Provisioning
Step 5
Step 6
Step 7
Step 8
6-8
Figure 6–8. Configuration for Network PG Window
Note
The APS feature is not applicable for the PSTN PG.
Select Locked from the Admin State drop-down list.
Click OK to return to the Protection Group Manager window.
Select PG Swap from the Configuration menu.
– Or –
Right-click the highlighted selection and select PG Swap from the
pop-up menu.
Observe the colors. The Primary Member is now blue and the
Secondary Member green.
1000-A2-GB22-10
June 2005