Switching Over - Paradyne CPX-1000 User Manual

7. Interface Groups
Step 4
Step 5
Switching
Over
7-26
Note
You can only delete Interface Groups that are not
associated with IADs.
Click Yes to delete the Interface Group.
Select Refresh CPX from the File menu to update the changes.
Each Interface Group has a primary and secondary channel. When
a primary channel fails, the secondary channel takes over and vice
versa. This switchover is automatic and requires no user
intervention or control over which channel to switch. The new
switching capability enables you to switch the Embedded
Operations Channel (EOC) and Timeslot Management Channel
(TMC) on a specified Interface Group.
1000-A2-GB22-10
June 2005