Paradyne CPX-1000 User Manual page 140

9. IAD Profiles and IADs Provisioning
Step 7
Step 8
Step 9
Step 10
Step 11
9-30
Click PVC, and the PVC tab appears
Figure 9–23. Create IAD — PVC Tab
Select a Protection Group that the IAD is assigned from the
Network Protection Group drop-down list.
Type the VPI value between 0 to 255 in the VPI field.
Type the VCI value in the VCI field. This identifies the
subscriber-specific virtual circuit between the CPX-1000 and the
ATM network.
If VPI is 0, then the VCI range is 32 to 1023.
If VPI is >0, then the VCI range is 0 to 1023. (Refer to
Chapter 5, CPX-1000
Select either ATM or Frame Relay from the Transport
drop-down list. Transport selections are dependant upon the IAD
Profile.
Note
The information in the Reference and State tabs is
optional and does not affect the operation of IADs. It
provides easy record-keeping when using multiple
DSLAMs or having different subscriber's locations.
(Figure 9–23).
Configuration, for VCI setting.)
1000-A2-GB22-10
June 2005