Hot Swapping Cp And Hsc Cards - Paradyne CPX-1000 User Manual

1000-A2-GB22-10
Hot Swapping
CP and HSC
Cards
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
June 2005
HSC cards are paired with CP cards. After the HSC card is
replaced, pairing with the CP card is automatically restored.
Note
Make sure to put on an anti-static wrist wrap when hot
swapping cards. Refer to CPX-1000 Voice Services
Platform Installation and Operation for more information.
To hot swap CP and HSC cards:
Click the CP card icon from the Tree or Shelf view.
If hot swapping an active CP or HSC card, continue with
Step 2.
If hot swapping a standby CP or HSC card, continue with
Step 3.
Perform switchover to place the active card in standby
a CP Switchover on page 11-11).
Place the CP card to the Locked state
page 11-9).
Select Remove Resources from the Configuration menu. A
prompt appears, asking if you want to remove all resources
associated with the card.
Click Yes. The card is removed from the Tree and Shelf views.
Remove the physical CP card, followed by its corresponding HSC
card, from the CPX-1000 shelf.
Insert the HSC card, followed by the CP card, and lock them in
place using the card ejectors. (Continue with
standby CP or HSC card.)
Select Refresh CPX from the File menu. The new cards appear in
the Tree and Shelf views.
Place the CP card to the Unlocked state
on page 11-9).
11. Maintenance and Services
(Performing
(Changing CP Card States
Step 9 if this is a
(Changing CP Card States
on
11-13