Removing Protection Group Members - Paradyne CPX-1000 User Manual

1000-A2-GB22-10
Removing
Protection
Group
Members
Step 1
Step 2
Step 3
June 2005
Before removing members from a Protection Group, ensure that
the port assigned to the group member is Locked.
To remove members from a Protection Group:
Click the desired PG icon (Network or PSTN) on the Tree View, the
Protection Group Manager window similar to
Figure 6–9. Protection Group Manager
Select a Protection Group member that you want to remove.
Select Configure from the Configuration menu.
– Or –
Right-click the highlighted selection and select Configure from
the pop-up menu.
The Configuration for Network PG window similar to
appears.
6. Protection Group Provisioning
Figure 6–9 appears.
Figure 6–10
6-9