1. Manuals
  2. Brands
  3. Paradyne Manuals
  4. Software
  5. Jetstream CPX-1000
  6. Installation manual

Paradyne CPX-1000 Installation Manual

Zhone jetstream cpx-1000 voip: installation guide
Hide thumbs Also See for CPX-1000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Installation Manual
Jetstream
®
JetVision

Installation Guide

Release 2.5
Document No. 1010-A2-GN21-00
February 2003

Advertisement

Table of Contents
loading

Related Manuals for Paradyne CPX-1000

Summary of Contents for Paradyne CPX-1000

  • Page 1: Installation Guide

    Jetstream ® JetVision Installation Guide Release 2.5 Document No. 1010-A2-GN21-00 February 2003...
  • Page 2 Copyright © 2003 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Paradyne Corporation, 8545 126th Ave.
  • Page 3 1010-A2-GN21-00 JetVision/JetWay Software License Agreement CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. BY USING ANY OF THE JETVISION/JETWAY SOFTWARE, YOU AGREE TO BE BOUND BY THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT USE OR INSTALL ANY OF THE SOFTWARE. IN SUCH EVENT, YOU MAY RETURN THE SOFTWARE TO THE SELLER OR TO PARADYNE (UNUSED) FOR A REFUND OF THE PRICE PAID.
  • Page 4 5. Limited Warranty and Disclaimer of Warranties The media upon which any Software is contained is warranted to be free from defects in material and workmanship for a period of thirty (30) days from the date of delivery to Licensee (the “Warranty Period”). The entire liability of Paradyne (and, as applicable, its licensor(s)) and Licensee’s exclusive remedy for breach of the foregoing limited warranty shall be for Paradyne to replace any defective media which is returned to Paradyne during the Warranty Period.
  • Page 5 1010-A2-GN21-00 10. U.S. Government Restricted Rights The following terms shall apply where Licensee is an agency or unit of the U.S. government. Units of the DoD. Use, duplication or disclosure by the government is subject to restrictions as set forth in paragraph (c)(1)(ii) of the Rights in technical Data and Computer Software clause at DFARS 252.227-7013.
  • Page 6 1010-A2-GN21-00 February 2003...

  • Page 7: Table Of Contents

    Preface Audience ...iii Organization ...iii Related Documents...iv Chapter 1 Installation Components...1-1 Versions Compatibility...1-3 Installation Requirements for Windows...1-3 Installation Requirements for Solaris...1-4 Chapter 2 New Installation ...2-1 Upgrading JetVision Server...2-16 NAT Firewall Connection ...2-24 February 2003 Table of Contents Installation Requirements Windows Environment Before Installation ...2-2 Performing a Pre-installation Check ...2-2...
  • Page 8 Table of Contents Removing JetVision Components...2-29 Removing Oracle 8.1.6...2-32 Chapter 3 New Installation ...3-1 Upgrading JetVision Server...3-19 NAT Firewall Connection ...3-27 Solaris OS Packages ...3-32 Solaris OS Patches ...3-33 Uninstallation ...3-37 Index Solaris Environment Before Installation ...3-2 Installing JetVision Server...3-5 Installing JetVision Client ...3-13 Customizing Gatekeeper in JetVision Server...3-28 Customizing JetVision Client to Access Gatekeeper .3-29...

  • Page 9: Preface

    The Jetstream JetVision Installation Guide provides instructions for installing JetVision software on Windows or Solaris computers. Refer to Jetstream JetVision User’s Guide for information on how to use JetVision to configure, provision, and monitor Paradyne Jetstream equipment in broadband networks. Audience The JetVision Installation Guide is written for network operations center personnel, who install, manage, and maintain voice...

  • Page 10: Related Documents

    To order a paper copy of a Paradyne document, or to talk to a sales representative, please call 1-727-530-2000. Systems. Jetstream JetVision User’s Guide Describes the top level management of multiple CPX-1000 equipment. Jetstream CPX-1000 Voice Services Platform Installation and Operation...

  • Page 11: Installation Requirements

    This chapter provides installation requirements for installing JetVision Server and JetVision Client on Windows and Sun Solaris operating systems. This chapter includes the following topics: JetVision Server and JetVision Client are typically installed on separate machines when distributed graphical user interface (GUI) access is required.
  • Page 12 1. Installation Requirements PC 2 JetVision Client JetVision Client Visibroker Browser Info Center Figure 1–1. JetVision Installation Components Table 1–1. JetVision 2.5 Capabilities HTTP Apache IIOP HTTP LAN/WAN IIOP IIOP IIOP Capabilities Number of JetVision Server sessions running at the same time Number of JetVision Client sessions per JetVision Server...

  • Page 13: Versions Compatibility

    Versions The JetVision 2.5 Server can concurrently manage any combination Compatibility of CPX-1000 2.5, CPX-1000 2.4, or CPX-1000 2.3.3.x. The JetVision 2.5 Client allows you to provision any combination of CPX-1000 2.5, CPX-1000 2.4, or CPX-1000 2.3.3.x. JetVision version information can be found by clicking About in the Help menu.

  • Page 14: Installation Requirements For Solaris

    CD-ROM drive 256 color VGA display card 10/100 Ethernet card Recommended Server Configuration (up to 50 CPX-1000 systems) Sun Enterprise 250 system (2 x 400 MHz) 1 GB RAM 2 GB virtual memory or 2X RAM 40 Gb free disk space...

  • Page 15: Windows Environment

    This chapter provides instructions for installing, upgrading, and removing JetVision Server and JetVision Client on a Windows operating system. This chapter includes the following topics: Before you begin installing JetVision Server and JetVision Client, ensure that your computer meets all hardware requirements for the Windows operating system Requirements).

  • Page 16: Before Installation

    2. Windows Environment Before Before installation, do the following: Installation Performing a Pre- To perform a pre-installation check: installation Check Insert the JetVision Server Windows installation CD-ROM into the Step 1 CD-ROM drive to display the content. Double-click startjetutil.bat (tools/jetutil/bin). A console Step 2 window appears, displaying the menu selection Figure 2–1.

  • Page 17: Installing Jetvision Server

    1010-A2-GN21-00 Type a number that corresponds to the application you are Step 4 installing, then press <Enter>. The window displays your workstation capacity and informs you of meeting the installation requirement. Type q , then press <Enter> to quit. Or press any key to return to Step 5 the menu selection window to continue with system check for other application you are installing.
  • Page 18 2. Windows Environment Click Next. The JetVision Application Selection screen appears Step 3 (Figure Figure 2–4. JetVision Application Selection Screen Select Install JetVision Server, then click Next. A Step 4 welcome screen similar to 2–4). Note At any time during installation, you can click the Back button to check or change the previous setting.
  • Page 19 1010-A2-GN21-00 Click Next. The License Agreement screen appears Step 5 Figure 2–5. License Agreement Screen Select the I accept the terms of the license Step 6 agreement button, then click Next. The JetVision Server Setting screen appears February 2003 Select this box to continue Note The Next button is enabled after you accept the terms of the licence agreement.
  • Page 20 2. Windows Environment Figure 2–6. JetVision Server Setting Screen Click Next to accept the default name (this name is the same as Step 7 that of your computer). – Or – Type the JetVision Server name (up to 16 alphanumeric characters with no spaces and punctuation) in the JetVision Server ID field.
  • Page 21 1010-A2-GN21-00 The Oracle 8.1.6 Setting screen appears Figure 2–7. Oracle 8.1.6 Setting Screen Type a number in the Historical Alarm DB Size (in MB) Step 8 field, and click Next to accept the default path: C:\orant. – Or – Type the directory path in the Oracle 8.1.6 Destination Directory field or click Browse to navigate to where Oracle will be installed.
  • Page 22 2. Windows Environment The Historical PM Database Size screen appears Figure 2–8. Historical PM Database Size Screen Click to select the button that describes the size of your network Step 9 (the PM DB size (in MB) field is automatically populated), then click Next.
  • Page 23 1010-A2-GN21-00 The Ready to Install screen supporting components that will be installed and their file sizes. Figure 2–10. Ready to Install Screen Click install Now. A file extraction screen appears, followed by Step 11 the Oracle installation status Figure 2–11. Installing Oracle Status Screen The installation will take between 30 to 60 minutes depending on your computer.

  • Page 24: Installing Jetvision Client

    2. Windows Environment Figure 2–12. Installation Summary Screen Click Exit. The JetVision Server and InfoCenter icons on your Step 13 desktop. Reboot your computer or, if you are installing JetVision Client on Step 14 the same computer, continue to install the JetVision Client, and reboot later.
  • Page 25 1010-A2-GN21-00 To install JetVision Client on Windows, follow these steps: Log on with administrator privileges to the computer where you Step 1 want to install JetVision Client. Insert the JetVision Client installation CD-ROM into the CD-ROM Step 2 drive. The Welcome screen appears Figure 2–13.
  • Page 26 2. Windows Environment Click Next. The JetVision Application Selection screen appears Step 3 (Figure Figure 2–14. JetVision Application Selection Screen Select Install JetVision Client, then click Next. A Step 4 Welcome screen similar to Click Next. The License Agreement screen appears Step 5 Figure 2–15.
  • Page 27 1010-A2-GN21-00 Select the I accept the terms of the license Step 6 agreement check box, then click Next. The Web Browser Panel screen appears Figure 2–16. Web Browser Panel Screen February 2003 Note The Next button is enabled after you accept the terms of the licence agreement.
  • Page 28 2. Windows Environment Click Next. The JetVision Client Setting screen appears Step 7 (Figure Figure 2–17. JetVision Client Setting Screen Type the following information (up to 16 alphanumeric characters Step 8 with no spaces or punctuation). Click Next, and the Destination Folder screen appears (Figure Figure 2–18.
  • Page 29 1010-A2-GN21-00 Click Next to accept the default path: C:\Jetstream\. Step 9 – Or – Type the directory path in the Destination field or click Change to navigate to where JetVision Client will be installed. The Ready to Install for JetVision Client screen appears (Figure Figure 2–19.

  • Page 30: Upgrading Jetvision Server

    2. Windows Environment Click Exit to complete the installation. The JetVision Client icon Step 11 appears on your desktop. Upgrading Multiple releases of JetVision Client can co-exist on the same JetVision computer. To communicate between JetVision Server and JetVision Client, both the server and client must share the same release Server number.
  • Page 31 1010-A2-GN21-00 To upgrade the JetVision Server, follow these steps: Log on with administrator privileges to the computer where you Step 1 want to install JetVision Server. Insert the JetVision Server Windows installation CD-ROM into the Step 2 CD-ROM drive. The Welcome screen appears Figure 2–21.
  • Page 32 2. Windows Environment Figure 2–22. JetVision Application Selection Screen Select Install JetVision Server, then click Next. A Step 4 welcome screen similar to Click Next. The License Agreement screen Step 5 Figure 2–23. License Agreement Screen 2-18 Note At any time during installation, you can click the Back button to check or change the previous setting.
  • Page 33 1010-A2-GN21-00 Select the I accept the terms of the license Step 6 agreement button, then click Next. The JetVision Server Setting screen appears Figure 2–24. JetVision Server Setting Screen Click Next to accept the default name (this name is the same as Step 7 that of your computer).
  • Page 34 2. Windows Environment The Oracle 8.1.6 Setting screen appears Figure 2–25. Oracle 8.1.6 Setting Screen 2-20 Note When Autostart JetVision Server is selected (default setting), JetVision Server will automatically start upon reboot. Note If Oracle 8.1.6 is installed on your system, its location is displayed and the Browse button and the Historical Alarm DB Size field are grayed out.
  • Page 35 1010-A2-GN21-00 Click Next. The Historical PM Database Size screen appears Step 8 (Figure Figure 2–26. Historical PM Database Size Screen Click to select the button that describes the size of your network Step 9 (the PM DB size field is automatically populated), then click Next. The Destination Folder for JetVision Server screen appears (Figure Figure 2–27.
  • Page 36 2. Windows Environment Click Next to accept the default path: C:\Jetstream. Step 10 – Or – Type the directory path in the destination directory field or click Change to navigate to where the JetVision Server will be installed. Click Next. The Ready to Install screen Step 11 listing other supporting components that will be installed and their file sizes.
  • Page 37 1010-A2-GN21-00 Press any key to close the console window and return to the Step 13 installation. the following dialog box appears, asking if you want to replace the older files. Click Yes to All. A console windows appears in the Step 14 background, showing the files binding process.

  • Page 38: Nat Firewall Connection

    2. Windows Environment NAT Firewall A Network Address Translator (NAT) firewall, working closely Connection with a router, examines each request to determine whether to forward it toward its destination (JetVision Client). A firewall also works with a proxy server (JetVision Server) that makes network requests on behalf of workstation users.

  • Page 39: Customizing Gatekeeper In Jetvision Server

    1010-A2-GN21-00 Customizing To customize the gatekeeper.properties file, follow these Gatekeeper in steps: JetVision Server Locate the gatekeeper.properties file. For example, Step 1 Add the following lines to the beginning of the file Step 2 Modify the following lines. Step 3 exterior_address=10.0.84.5 exterior_proxy_address=172.16.1.2 exterior_port=15000...

  • Page 40: Customizing Jetvision Client To Access Gatekeeper

    2. Windows Environment Customizing To customize JetVision Client, follow theses steps : JetVision Client to Access Gatekeeper Go to the emsclient_2.5\bin directory. For example, Step 1 Add the following two flags to Visibroker in the Step 2 startemsclient.bat file 2-26 c:\jetstream\emsclient_2.5\bin Important If you enable the wordwrap feature in Notepad, be careful...
  • Page 41 1010-A2-GN21-00 @IF /I "%1" EQU "/D" GOTO _LABEL1 @IF /I "%2" EQU "/D" GOTO _LABEL2 :_LABEL1 @IF /I "%2" NEQ "" CD /D "%2" :_LABEL2 @IF /I "%1" NEQ "" CD /D "%1" :_DEFAULT @%JSROOTDIR%\BIN\JsLaunch.exe %VBHOME%\BIN\vbj -mx64m - DORBalwaysProxy - DORBgatekeeperIOR=http://orion:2851/jetems/10.0.84.10/iors/gatekeeper.ior -DSPLASHSCREEN="%JSROOTDIR%\icons\ems_splash.jpg"...

  • Page 42: Network Nat Process Example

    2. Windows Environment Network NAT Figure 2–33 Process Example Server, a router, and JetVision Client. It also shows the proper login server name and the server IP. The login address is the one that associates with the outside of the NAT network;...

  • Page 43: Removing Jetvision Components

    1010-A2-GN21-00 Removing If both the JetVision Server and JetVision Client are installed on the JetVision same computer, remove JetVision Client first. Components To remove JetVision components, follow these steps: Click the Start button > Settings > Control Panel. Step 1 Double-click Add/Remove Programs.
  • Page 44 2. Windows Environment Click Yes. The Uninstallation Welcome screen appears Step 4 (Figure Figure 2–35. Uninstallation Welcome Screen Click Next. The Feature Selection screen appears Step 5 Figure 2–36. Feature Selection Screen 2-30 2–35). 1010-A2-GN21-00 (Figure 2–36). February 2003...
  • Page 45 1010-A2-GN21-00 Select the components that you want to remove, then click Next. Step 6 The Ready to Uninstall screen appears Figure 2–37. Ready to Uninstall Screen Click Uninstall Now. The Uninstallation Summary screen Step 7 appears uninstalled. Figure 2–38. Uninstallation Complete Screen Click Exit.
  • Page 46 2. Windows Environment Removing To remove Oracle 8.1.6, follow these steps: Oracle 8.1.6 Go to Control Panel, double-click the Services icon. The Services Step 1 dialog box appears Figure 2–39. Services Stop all Oracle Windows services (any names that start with Step 2 Oracle, e.g., OracleServiceORCL) and click Stop.
  • Page 47 1010-A2-GN21-00 Click Deinstall Products. The Inventory dialog box appears Step 5 (Figure Figure 2–41. Oracle Inventory Click to expand the ORCL tree and select all files on the list, as Step 6 shown in Figure 2–42. Oracle Inventory — with Files Selected February 2003 2–41).
  • Page 48 2. Windows Environment Click Remove. A confirmation dialog box appears, listing the files Step 7 to be removed Figure 2–43. Confirmation Click Yes. A screen appears, showing the removal status, followed Step 8 by an empty inventory dialog box Figure 2–44. Empty Inventory Screen Click Close to return to the Oracle Universal Installer screen Step 9 (Figure 2–41...
  • Page 49 1010-A2-GN21-00 Click the Start button, then click Run. The Run dialog box Step 11 appears Figure 2–45. Run Type regedit . The Registry Editor dialog box appears Step 12 (Figure Figure 2–46. Registry Editor Click to expand the HKEY_LOCAL_MACHINE tree, then SOFTWARE, Step 13 and delete ORACLE.
  • Page 50 2. Windows Environment 1010-A2-GN21-00 2-36 February 2003...

  • Page 51: Chapter 3 Solaris Environment

    This chapter provides instructions for installing, upgrading, and removing JetVision Server and JetVision Client on a Sun Solaris computer. This chapter includes the following topics: Before you begin installing JetVision Server and JetVision Client, ensure that your computer meets all hardware requirements for the Solaris operating system Requirements).

  • Page 52: Before Installation

    3. Solaris Environment JetVision uses JRE 1.3.1 for installation. Only one JetVision Server is supported per installation. Before Before installation, do the following Installation Stop all Java applications. Check the size of your hard drive disk space (8 GB is recommended).
  • Page 53 1010-A2-GN21-00 February 2003 Verify that the following operating system packages are installed (see Solaris OS Packages information): SUNWarc SunWbtool SunWhea SunWlibm SunWlibms SUNWsprot SUNWtoo Verify that the following executables are present in the usr/ccs/bin directory: make Run jetutil to verify if the target workstation meets the minimum installation (i.e., hardware and software) requirement.
  • Page 54 3. Solaris Environment Figure 3–1. Jetutil Main Menu Figure 3–2. Jetutil Menu Selection Type 6 to select Run System Requirement Checks, then press <Enter>. The menu selection appears (Figure 3–2). 1010-A2-GN21-00 February 2003...

  • Page 55: Installing Jetvision Server

    1010-A2-GN21-00 Installing JetVision Server To install JetVision Server on Solaris, follow these steps: Log on with administrator privileges to the computer where you Step 1 want to install JetVision Server, and open a console window. Insert the JetVision Server Solaris installation CD-ROM into the Step 2 CD-ROM drive.
  • Page 56 3. Solaris Environment When the installation program starts, the Welcome screen appears (Figure Figure 3–3. Welcome Screen Click Next. The JetVision Application Selection screen appears Step 3 (Figure Figure 3–4. JetVision Application Selection Screen 3–3). 3–4). Note At any time during installation, you can click the Back button to check or change the previous setting.
  • Page 57 1010-A2-GN21-00 Select Install JetVision Server, then click Next. A Step 4 welcome screen similar to Click Next. The License Agreement screen Step 5 Figure 3–5. License Agreement Screen Select the I accept the terms of the license Step 6 agreement checkbox, then click Next. The Destination Folder screen appears Figure 3–6.
  • Page 58 3. Solaris Environment Click Next to accept the default path: /opt/jetstream. Step 7 – Or – Type the directory path in the destination directory field or click Change to navigate to where the JetVision Server will be installed. The Oracle 8.1.6 Setting screen appears Figure 3–7.
  • Page 59 1010-A2-GN21-00 Click Next. The Historical PM Database screen appears (Figure Figure 3–8. Historical PM Database Screen Click to select the button that describes the size of your network Step 9 (the PM DB size field is automatically populated), then click Next. The JetVision Server Setting screen appears Figure 3–9.
  • Page 60 3. Solaris Environment Type the JetVision Server name (up to 16 alphanumeric characters Step 10 with no spaces or punctuation) in the JetVision Server ID field. Then Click Next. The Ready to Install screen supporting components that will be installed and their file sizes. Figure 3–10.
  • Page 61 1010-A2-GN21-00 Click install Now. A screen appears Step 11 JetVision Server installation status, followed by the Installation Summary screen appears that have been installed. Figure 3–11. JetVision Server Installation Status Screen Figure 3–12. Installation Summary Screen February 2003 3. Solaris Environment (Figure 3–11), showing the (Figure...
  • Page 62 3. Solaris Environment Click Next. The Readme Information screen appears, informing Step 12 the status of your installation Figure 3–13. Readme Information Screen Click Exit. The installation will take between 30 to 60 minutes Step 13 depending on your computer. 3-12 (Figure Note...

  • Page 63: Installing Jetvision Client

    1010-A2-GN21-00 Installing JetVision Client uses JRE 1.3.1 for installation. Make sure to stop all JetVision Client Java applications before installing JetVision 2.5. To install JetVision Client for Solaris, follow these steps: Log on with administrator privileges to the computer where you Step 1 want to install JetVision Client, and open a console window.
  • Page 64 3. Solaris Environment Click Next. The JetVision Application Selection screen appears Step 3 (Figure Figure 3–15. JetVision Application Selection Screen Select Install JetVision Client, then click Next. A Step 4 Welcome screen similar to Click Next. The License Agreement screen appears Step 5 Figure 3–16.
  • Page 65 1010-A2-GN21-00 Select the I accept the terms of the license Step 6 agreement check box, then click Next. The Web Browser Panel screen appears Figure 3–17. Web Browser Panel Screen February 2003 Note The Next button is enabled after you accept the terms of the licence agreement.
  • Page 66 3. Solaris Environment Figure 3–18. Web Browser Not Found Screen Click Next. The Destination Folder screen appears Step 7 (Figure Figure 3–19. Destination Folder Screen 3-16 — If you know the Web browser location, type the directory path in the Web Browser Location field. —...
  • Page 67 1010-A2-GN21-00 Click Next to accept the default path: /opt/jetstream. Step 8 – Or – Type the directory path in the Destination field or click Change to navigate to where JetVision Client will be installed. The JetVision Client Setting screen appears Figure 3–20.
  • Page 68 3. Solaris Environment Click Install Now. The Installing screen appears, showing the Step 10 file extraction progress Figure 3–22. Installing Screen After the files are extracted, the Installation Summary screen (Figure Figure 3–23. Installation Summary Screen Click Exit. Step 11 3-18 (Figure 3–23), listing the installed applications and their locations.

  • Page 69: Upgrading Jetvision Server

    1010-A2-GN21-00 Upgrading Multiple releases of JetVision Client can co-exist on the same JetVision computer. To communicate between JetVision Server and JetVision Client, both the server and client must share the same Server release number. For example, if you upgrade JetVision Server to 2.5, you need to install JetVision Client.
  • Page 70 3. Solaris Environment When the installation program starts, the Welcome screen appears (Figure Figure 3–24. Welcome Screen Click Next. The JetVision Application Selection screen appears Step 3 (Figure Figure 3–25. JetVision Application Selection Screen 3-20 3–24). 3–25): Note At any time during installation, you can click the Back button to check or change the previous setting.
  • Page 71 1010-A2-GN21-00 Select Install JetVision Server, then click Next. A Step 4 welcome screen similar to followed by the License Agreement screen Figure 3–26. License Agreement Screen Select the I accept the terms of the license Step 5 agreement checkbox, then click Next. The Readme Information screen appears an older version of JetVision.
  • Page 72 3. Solaris Environment Figure 3–27. Readme Information Screen Click Next. The Destination Folder screen appears Step 6 Figure 3–28. Destination Folder Screen Step 7 Click Next to accept the default path: /opt/jetstream. – Or – Type the directory path in the destination directory field or click Change to navigate to where the JetVision Server will be installed.
  • Page 73 1010-A2-GN21-00 Figure 3–29. Oracle 8.1.6 Setting Screen Type a number in the Historical Alarm DB Size (in MB) Step 8 field, then click Next to accept the default path: /opt/jetstream/ora_unix. – Or – Type the directory path in the Oracle 8.1.6 Destination Directory field or click Browse to navigate to where Oracle 8.1.6 will be installed.
  • Page 74 3. Solaris Environment Figure 3–30. Historical PM Database Screen Click to select the button that describes the size of your network Step 9 (the PM DB size field is automatically populated), then click Next. The JetVision Server Setting screen appears Figure 3–31.
  • Page 75 1010-A2-GN21-00 The Ready to Install screen supporting components that will be installed and their file sizes. Figure 3–32. Ready to Install Screen Click install Now. A screen appears Step 11 JetVision Server installation status, followed by the Installation Summary screen appears that have been installed.
  • Page 76 3. Solaris Environment Figure 3–33. JetVision Server Installation Status Screen Figure 3–34. Installation Summary Screen Step 12 Click Next. The Readme Information screen appears, informing the status of your installation 3-26 1010-A2-GN21-00 (Figure 3–35) February 2003...

  • Page 77: Nat Firewall Connection

    1010-A2-GN21-00 Figure 3–35. Readme Information Screen Click Exit. The installation will take between 30 to 60 minutes Step 13 depending on your computer. Verify all files are properly installed and ensure that Oracle 8.1.6 Step 14 contains no error messages. NAT Firewall A Network Address Translator (NAT) firewall, working closely Connection...

  • Page 78: Customizing Gatekeeper In Jetvision Server

    3. Solaris Environment Customizing To customize the gatekeeper.properties file, follow these Gatekeeper in steps: JetVision Server Locate the gatekeeper.properties file. For example, Step 1 Add the following lines to the beginning of the file Step 2 Modify the following lines. Step 3 exterior_address=10.0.84.5 exterior_proxy_address=172.16.1.2...

  • Page 79: Customizing Jetvision Client To Access Gatekeeper

    1010-A2-GN21-00 Launch Gatekeeper by typing the following commands. Step 4 Customizing To customize JetVision Client, follow theses steps: JetVision Client to Access Gatekeeper Go to the emsclient_2.5\bin directory. For example, Step 1 Add the following two flags to Visibroker in the Step 2 startemsclient.bat file February 2003...
  • Page 80 3. Solaris Environment @IF /I "%1" EQU "/D" GOTO _LABEL1 @IF /I "%2" EQU "/D" GOTO _LABEL2 :_LABEL1 @IF /I "%2" NEQ "" CD /D "%2" :_LABEL2 @IF /I "%1" NEQ "" CD /D "%1" :_DEFAULT @%JSROOTDIR%\BIN\JsLaunch.exe %VBHOME%\BIN\vbj -mx64m - DORBalwaysProxy - DORBgatekeeperIOR=http://orion:2851/jetems/10.0.84.10/iors/gatekeeper.ior -DSPLASHSCREEN="%JSROOTDIR%\icons\ems_splash.jpg"...

  • Page 81: Network Nat Process Example

    1010-A2-GN21-00 Network NAT Figure 3–38 Process Example Server, a router, and JetVision Client. It also shows the proper login server name and the server IP. The login address is the one that associates with the outside of the NAT network; it is an unused address that is local to the NAT subnet.

  • Page 82: Solaris Os Packages

    3. Solaris Environment Solaris OS The required Solaris packages are listed in Packages Table 3–1. Required OS Packages Adding a To add a Solaris package, follow these steps: Package Access the Solaris software cd that contains the OS packages using Step 1 the cd command.

  • Page 83: Solaris Os Patches

    1010-A2-GN21-00 Solaris OS In addition to the patches listed in Patches recommend installing the latest patch cluster for your version of Solaris, as well as the J2SE Solaris patch cluster. Table 3–2. Required OS Patches February 2003 Note If you are unable to locate the exact patch number, use the latest updated patch.

  • Page 84: Downloading The Patch

    3. Solaris Environment Table 3–2. Required OS Patches (Continued) Downloading the To download the patch, follow these steps: Patch Connect to http://java.sun.com/j2se/1.3/ Step 1 download.html. Go to the Solaris OS Patches section and select Download link Step 2 under Solaris SPARC™. Select the appropriate URL to download the patches.

  • Page 85: Installing The Patch

    1010-A2-GN21-00 Installing the Use the command showrev -p to list the patches installed on Patch your computer. If the patches are not already installed, follow the following steps to install the necessary patches. Extract the patch tar file that matches your version of Solaris (only Step 1 one is needed per computer).
  • Page 86 3. Solaris Environment Step 6 Install the patches. For example, Where <your_patch_directory> is the directory path where the patches were extracted in Step 2. Shut down and reboot your computer. For example, Step 7 3-36 Note In the top-level directory of each patch, Install.info file provides general patch installation instructions.

  • Page 87: Uninstallation

    1010-A2-GN21-00 Uninstallation If both the JetVision Server and JetVision Client are installed on the same computer, remove JetVision Client first. Removing To remove JetVision components, follow these steps JetVision Log on to the computer with administrator privileges, and open a Step 1 terminal window.
  • Page 88 3. Solaris Environment Click Yes. The Feature Selection screen appears Step 4 Figure 3–40. Feature Selection Screen Select the components that you want to remove, then click Next. Step 5 The Ready to Uninstall screen appears Figure 3–41. Ready to Uninstall Screen 3-38 1010-A2-GN21-00 (Figure...
  • Page 89 1010-A2-GN21-00 Click Uninstall Now. The Uninstallation Summary screen Step 6 appears uninstalled. Figure 3–42. Uninstallation Summary Screen Click Exit to complete the process, and return to the terminal Step 7 window. Repeat Step 8 component. Removing Oracle To remove Oracle 8.1.6 on Solaris, follow these steps: 8.1.6 Log on to the computer with administrator privileges, and open a Step 1...
  • Page 90 3. Solaris Environment 1010-A2-GN21-00 3-40 February 2003...
  • Page 91 application selection Solaris 3-6 3-14 3-20 Windows 2-4 2-12 2-18 audience for this document iii capabilities 1-2 client installation Solaris 3-13 Windows 2-10 components 1-1 customizing gatekeeper Solaris 3-28 Windows 2-25 customizing JetVision client to access gatekeeper Solaris 3-29 Windows 2-26 destination folder Solaris 3-7 3-16...
  • Page 92 Index JetVision client setting Solaris 3-17 Windows 2-14 JetVision server setting Solaris 3-24 Windows 2-19 license agreement Solaris 3-7 3-14 3-21 Windows 2-5 2-12 2-18 NAT firewall connection Solaris 3-27 Windows 2-24 network NAT process example Solaris 3-31 Windows 2-28 Oracle removing Solaris 3-39...
  • Page 93 1010-A2-GN21-00 uninstalling JetVision Solaris 3-37 Windows 2-29 upgrade JetVision server Solaris 3-19 Windows 2-16 web browser Solaris 3-15 Windows 2-13 Welcome screen Solaris 3-6 3-13 3-20 Windows 2-4 2-11 2-17 Windows installation requirements 1-3 new Jetvision installation 2-1 February 2003 Index...

This manual is also suitable for:

Jetstream jetvision 2.5

Table of Contents