Paradyne CPX-1000 User Manual page 79

1000-A2-GB22-10
Step 5
Step 6
Step 7
June 2005
Type a new name or select the name of the Local Digital Switch
(LDS) to which the Interface Group connects from the LDS drop-
down list.
If no LDS names have been created, type a name in the LDS field.
Click to select the RT Provision checkbox if you want to enable
the Class 5 switch to assign CRVs on the CPX-1000.
Notes
You can select Real Time (RT) provisioning only at the
initial creation of the Interface Group. You can neither
modify nor remove RT provisioning once it's selected.
If you want to remove RT provisioning after the creation
of Interface Group, you must first delete the desired
Interface Group, then reprovision it without the RT
provisioning option.
You cannot change the primary DS1.
Select a secondary DS1 number from the Secondary DS1
drop-down list. For example, selecting 4 means that port 4 will be
assigned as the secondary DS1 channel.
Note
The DS1 port assignment is populated sequentially. For
example, the first assignment is for the primary and the
second assignment is the secondary.
7. Interface Groups
7-5