The Wizard; Creating Les Cas E&M Iads Using The Wizard - Paradyne CPX-1000 User Manual

1000-A2-GB22-10
Creating LES CAS
E&M IADs Using

the Wizard

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
June 2005
If any of parameters are incorrect, click Back until you reach
the screen in question and correct the parameters, then
proceed from that point forward.
To create LES CAS E&M IADs using the Wizard:
Select IAD Wizard from the Configuration menu.
– Or –
Right-click on the Tree View or Map View and select IAD
Wizard from the pop-up menu.
– Or –
Click (IAD wizard icon) on the toolbar.
The IAD Creation Wizard–Introduction screen appears
(Figure 9–6).
Click Next. The Informational screen appears
Click Next. The IAD Creation Wizard–IAD Profile Selection screen
appears (Figure 9–8).
Note
The Next button is enabled when the profile
information is selected.
Select a LES CAS Profile (default or user-created) from the IAD
Profile drop-down list. The IAD Type field is automatically
populated.
Click Next. The IAD Creation Wizard–Interface Group Selection
screen appears (Figure
Click Next. The IAD Creation Wizard–ATM Protection Group
Configuration screen appears
Select the Protection Group that the IAD is assigned from the ATM
Protection Group drop-down list.
Type the VPI value between 0 to 255 in the VPI field.
9. IAD Profiles and IADs Provisioning
9–15).
(Figure 9–10).
(Figure 9–7).
9-21