Paradyne CPX-1000 User Manual page 52

5. CPX-1000 Configuration
CPX-1000
Configuration
Profile
Table 5–1. CPX-1000 Configurable Parameters
CPX Parameter
ID
Name
IP Address
Default Gateway
Subnet Mask
Administrative State
Operational State
5-2
The CPX-1000 is preprovisioned with a standard configuration
profile.
Since most of the CPX-1000 configuration parameters cannot be
changed after Interface Groups and IADs are provisioned, modify
the CPX-1000 configuration at startup.
Table 5–1 lists the configuration parameters needed for configuring
the CPX-1000 in JetCraft.
Description
An identifier associated with the CPX-1000, consists of 4–63
alphanumeric characters (e.g., JET1). No spaces, underlined
characters, etc. allowed.
A name for the CPX-1000 that consists of up to 63 alphanumeric
characters (e.g., JETSET). No spaces, underlined characters, etc.
allowed.
Use this name for differentiating CPX-1000s, error reporting, and
when creating an IAD.
The 32-bit Internet Protocol address assigned to the CPX-1000.
The IP address that allows the CPX-1000 to be addressed over a
LAN or WAN.
The 32-bit identifier that allows the IP address of the CPX-1000 to
be used with multiple connections.
JetCraft administrative service-affecting state of CP cards and
ports. Options are:
Unlocked: Capable of service
Locked: Restricted from service (card is in the shelf, but
JetCraft or JetVision administrators restricted it from
service)
The operational state of the CPX-1000 cards and ports. Options
are:
Enabled
Disabled
1000-A2-GB22-10
June 2005