Creating A Les Cas E&M Iad Using The Create Command - Paradyne CPX-1000 User Manual

9. IAD Profiles and IADs Provisioning
Step 14
Step 15
Step 16
Step 17
Creating a LES
CAS E&M IAD
Using the Create
Command
Step 1
9-36
Select the DSLAM serving the subscriber from the DSLAM
drop-down list. If the DSLAM is not listed, type the name of the
DSLAM of up to 100 alphanumeric characters in the DSLAM field.
Select the subscriber from the Subscriber drop-down list. If the
subscriber is not listed, type the name of the subscriber of up to 100
alphanumeric characters in the Subscriber field.
Select the NR in Unassigned NRs column which you want to
associate to the IAD and click the > (assign) button.
Tip
Assigning NRs is optional. A maximum of 8 NRs can be
assigned to a single IAD.
Click OK to create the IAD.
To create LES CAS E&M IADs:
Select Create IAD from the Configuration menu.
– Or –
Right-click on the Tree View or Map View and select Create
IAD.
– Or –
Click on the toolbar.
The Create IAD window appears
1000-A2-GB22-10
(Figure 9–28).
June 2005