Paradyne CPX-1000 User Manual page 160

9. IAD Profiles and IADs Provisioning
Click one or both
checkboxes to filter IADs
Step 2
Step 1
Step 2
Step 1
Step 2
Step 3
Step 4
9-50
Figure 9–40. View/Update IAD Window
Specify your search by clicking one or a combination of the
following areas:
Company and DSLAM and Subscriber
Network Protection Groups, Interface Group, hardware
(HW) model and software (SW) version
Searching by Company, DSLAM, and Subscriber
Proceed as Steps 1 and 2 in
Click the checkbox next to Company, and select the name of the
company assigned to the IADs from the drop-down list. The DSLAM
and the subscriber for that company is automatically selected.
Searching by the Network Protective Groups
Proceed as Steps 1 and 2 in
Select Network Protection Group from the drop-down list.
Both the VCI and VPI fields are enabled.
Type the Network Protection Group identifier, or select it from the
drop-down list.
Select a range of VCI values by using the less than (<) or greater
than (>) symbols from the drop-down list, then type a VCI value in
the text field.
Searching IADs by Fields
Searching IADs by Fields
1000-A2-GB22-10
on page 9-49.
on page 9-49.
June 2005