Administration And User Management; Understanding User Access Control - Paradyne CPX-1000 User Manual

Understanding
User Access
Control
June 2005
C
Administration and User
This chapter provides instructions for provisioning users. These
tasks include:
Understanding user access control (page 4-1)
Changing user passwords (page 4-2)
Creating CPX users (page 4-3)
Although you can install JetCraft anytime, typically, you install the
CPX-1000 and then the JetCraft software. After installation, use
JetCraft to configure users and assign their access privileges. These
users can access the CPX-1000 and create Interface Groups and
IADs.
When you first start JetCraft, log in using the default user ID
(cpxuser) and password (cpxuser). The default user ID belongs to an
authorized user group that has access to all CPX operations. To
limit CPX-1000 access, we recommend changing the default
password as soon as possible.
Each user group has a specific level of access and privilege, and
users belonging to a specific group can only perform operations
that are assigned to that group. Each user is given a password
when the user group is created.
access levels and their privileges.
H A P T
Management
Table 4–1 lists and defines the user
4
E R
4-1