7. Interface Groups
Step 4
Step 5
7-14
Figure 7–12. View/Update Interface Groups Window
Select a port/channel by clicking the Card/Port or PG/channel,
then make the assignment by clicking the > button.
Assign as many ports/channels (up to 28) as needed to the
Interface Group.
Note
DS1s can be assigned from T1 or STS cards.
Tip
To assign multiple ports/channels, hold down the
Shift or Ctrl key while making your selections. Using
the Shift key lets you make your selections in
contiguous order; the Ctrl key lets you select ports/
channels in a random order.
1000-A2-GB22-10
June 2005