Cpx-1000 Components; Craft Terminal - Paradyne CPX-1000 User Manual

1. JetCraft Overview
CPX-1000
Components
Table 1–2. Components Represented as Icons in JetCraft
Icons

Craft Terminal

1-4
Table 1–2 lists and describes the icons used in JetCraft.
Description
CPX-1000 icon: the fundamental unit of installation. JetCraft
accesses one CPX-1000 at a time.
Shelf icon: up to 16 cards are installed in a CPX-1000 shelf.
Card icon: each card has configuration and status information.
Port icon: The physical ports on a card.
Protection Group (PG) manager icon: selects a PG for multiple
network (PSTN and ATM) PG assignments, unassignments, and
modification.
TDM Manager icon: selects for multiple Interface Group (IG)
creation, deletion and modification.
IAD icon: IADs are uniquely associated with a CPX-1000. You
create voice path ATM Permanent Virtual Circuits (PVCs) when
you create the IADs.
The JetCraft software runs on Windows 98/2000 or NT 4.0. A PC
(or laptop) with the JetCraft software installed serves as a Craft
terminal to the CPX-1000.
The Craft terminal communicates with a CPX-1000 through an
Ethernet connection using TCP/IP protocol. The physical
connection can be local (through a Local Area Network (LAN)
connection) or remote (through a Wide Area Network (WAN)
connection).
1000-A2-GB22-10
June 2005