9. IAD Profiles and IADs Provisioning
Step 15
Step 16
Step 17
9-26
Select the NR in Unassigned NRs column which you want to
associate to the IAD and click the > (assign) button.
Tip
Assigning NRs is optional. Maximum of 8 NRs can be
assigned to a single IAD.
Click Next. The IAD Creation Wizard–Port Configuration screen
appears
(Figure
9–20).
Figure 9–20. IAD Creation Wizard–Port Configuration
Screen
Notes
The number of ports is dependent upon the IAD Profile.
The field is automatically populated based on the profile
selection.
All CRVs and DS1/DS0s must be unique across all
IADs.
Do not select 16 kbps compression for LES CAS IADs.
Click to select the values for the following IAD port parameters
from the associated drop-down list.
Admin State
1000-A2-GB22-10
June 2005