Iads - Paradyne CPX-1000 User Manual

9. IAD Profiles and IADs Provisioning
Step 4

IADs

9-6
Figure 9–4. Delete IAD Profile Confirmation
Click Yes to delete the profile.
IADs install at the customer/subscriber premise.
the relationship of an IAD to a Voice-over-Broadband (VoBB)
network.
Phone
- ID
Sys
- Serial No.
- Interface
Group
LAN
- State
Phone
Sys
LAN
Figure 9–5. IAD Installation
Before the IADs are physically installed, you create and configure
them in the CPX-1000 (you can install an IAD first, but it won't go
into service until the IAD is created and configured in the
CPX-1000).
After you have created Interface Groups and IAD Profiles, you can
then use the Create IAD window to create and provision an IAD.
The CPX-1000 supports up to 8,192 IADs. The number of IADs
assigned to each Interface Group is limited by the available CRVs
(4096 per Interface Group).
Directory Number per Port
I AD
DSLAM
I AD
- DSLAM Name
- ILEC Company
1000-A2-GB22-10
Figure 9–5 shows
CPX-
1000
ATM Transport
ATM
Switch
Permanent Virtual
Circuit (PVC) per IAD
- ATM/port
- VPI
- VCI
0059
June 2005