1000-A2-GB22-10
Swapping
Protection
Group
Members
Step 1
Step 2
Step 3
Step 4
June 2005
To swap between the primary and secondary members of the
Protection Group:
Place the ATM ports to which an ATM Protection Group will be
switched in the Locked state.
Click the desired PG icon (Network or PSTN) on the Tree View, the
Protection Group Manager window similar to
Figure 6–7. Protection Group Manager
Select a Protection Group ID to which you want to switch member.
Select Configure from the Configuration menu.
– Or –
Right-click the highlighted selection and select Configure.
The Protection Group Manager window similar to
appears.
6. Protection Group Provisioning
Figure
6–7.
Figure 6–8
6-7