Paradyne CPX-1000 User Manual page 106

7. Interface Groups
Step 3
Step 4
Step 5
Step 6
7-32
Select PPS Settings from the Configuration menu.
– Or –
Right-click the highlighted selection and select PPS Settings
from the pop-up menu.
The PPS Settings window appears, displaying the current settings
(Figure 7–29).
Figure 7–29. PPS Settings Window
Select the settings from the drop-down list.
Uninhibited (default) means that the switchover is allowed,
when initiated.
Inhibit means that no switchover is allowed.
Click OK. A dialog box appears, asking if you want to change the
current state.
Click Yes.
1000-A2-GB22-10
June 2005