Hot Swapping Line Cards - Paradyne CPX-1000 User Manual

11. Maintenance and Services
Hot Swapping
Line Cards
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
11-14
Line cards are paired with their corresponding transition cards.
Line cards include:
ATM (OC-3 and DS-3)
TDM-8T1 and TDM-12T1
ECAC
STS-1
Note
Make sure to put on an anti-static wrist wrap when hot
swapping cards. Refer to CPX-1000 Voice Services
Platform Installation and Operation for more information.
To hot swap a line card:
Click a line card that you want to hot swap from the Tree or
Shelf View.
Place the selected line card to the Locked state
States on page 11-9).
Select Remove Resources from the Configuration menu. A
prompt appears, asking if you want to remove all resources
associated with the card.
Click Yes. The card is removed from the Tree and Shelf views.
Remove the physical line card first, followed by its corresponding
transition card, from the CPX-1000 shelf.
Insert the new physical transition card, followed by the line card,
and lock them in place, using the card ejectors.
Select Refresh CPX from the File menu. The new card appears in
the Tree and Shelf views. The state of the card automatically
changes to "unlocked," and all resources for that card are restored.
1000-A2-GB22-10
(Changing CP Card
June 2005