6. Protection Group Provisioning
Step 5
Step 6
Step 7
Step 8
Step 9
6-4
Select Unlocked from the Admin State drop-down list.
Repeat Step 5 for the Secondary Member.
Select a cable type.
For OC-3 ports, select Straight.
For DS-3 ports, select either Y-cable or Straight.
Note
The APS selection is enabled only when straight cable is
selected.
Click to select the Unidirectional 1 Plus 1 to enable the
ATM switch to automatically switch the active to standby if the
card fails.
Click OK. The newly created Protection Groups display in the
tabular view
(Figure
6–3).
Figure 6–3. Protection Groups Displayed in Tabular
View
1000-A2-GB22-10
June 2005