Paradyne CPX-1000 User Manual page 234

C. Alarm Summary
Table C–1. Alarm Summary (Continued)
Affected
Alarm Message
Element
DS1 Ports <DS1 ID> — Lost frame
sync — Red alarm
<DS1 ID> — Received
remote alarm indication —
Yellow alarm
<DS1 ID> — Received
remote alarm signal — Blue
alarm
<DS1 ID> — Software error
in DS0 read. Please call
Technical Support
<DS1 ID> — Unknown
alarm
Protection The <Card Shelf ID> <Card
Group ID> does not exist
The <Port Shelf ID> <Card
ID> <Port ID> does not
exist
C-6
Description
Indicates the T1 has lost
sync with the host. (The
remote end displays a
yellow alarm.)
Indicates a Remote Alarm
Indication (RAI) signal is
being received on the line.
The remote end displays a
red alarm; which means the
remote end cannot
synchronize with the signal
originating from the T1
card.
Indicates an Alarm
Indication Signal (AIS) is
being received. This means
the remote end has lost
connection with its data
source or is in a test mode
and is transmitting all 1s
(AIS) instead.
Indicates an attempt to read
data from a T1 card has
failed.
Indicates the DS1 has not
been initialized or
recognized.
Indicates the card does not
exist during startup
verification against card
information from discovery.
Indicates the port does not
exist during startup
verification against card
information from discovery.
1000-A2-GB22-10
Triggered
Severity
by
Major CORE
Major CORE
Major CORE
Major CORE
Major CORE
Critical CME
Critical CME
June 2005