Paradyne CPX-1000 User Manual page 132

9. IAD Profiles and IADs Provisioning
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
9-22
Type the VCI value in the VCI field. This identifies the
subscriber-specific virtual circuit between the CPX-1000 and the
ATM network.
If VPI is 0, then the VCI range is 32 to 1023.
If VPI is >0, then the VCI range is 0 to 1023. (Refer to
Chapter 5, CPX-1000
Select either ATM or Frame Relay from the Transport
drop-down list. Transport selections are dependant upon the IAD
Profile.
Click Next. The Reference Configuration screen appears
(Figure 9–11).
Type the optional information of up to 100 alphanumeric
characters in their associated fields.
Company—the company providing the voice service
DSLAM—the DSLAM serving the subscribers
Subscriber—the name of the subscriber
Click Next. The Associate Network Resources screen appears
(Figure 9–12).
Select the NR in Unassigned NRs column which you want to
associate to the IAD and click the > (assign) button.
Tip
Assigning NRs is optional. Maximum of 8 NRs can be
assigned to a single IAD.
Click Next. The IAD Creation Wizard–Port Configuration screen
appears (Figure 9–18).
Configuration, for VCI setting.)
1000-A2-GB22-10
June 2005