Starting On Windows; H Installation Troubleshooting - Paradyne OPENLANE User Manual

Starting on Windows

"
"
"
Installation Troubleshooting
7800-A2-GB28-80
You can start the Performance Wizard with or without OpenView as described in
the following procedures.
Procedure
To start as a standalone application:
1. Select Programs from the Start menu.
2. Click on the Performance Wizard icon or run the script PerfWiz.bat.
Procedure
To start from OpenView and display the Navigation Wizard:
1. Click on the Control menu and select OpenLane. The OpenLane menu has a
submenu with the options Graphs and Navigation Wizard.
2. Click on Navigation Wizard.
Procedure
To start from OpenView and display a default Real Time Chart:
1. Click on a device icon from the OpenView map.
2. Click on the Control menu and select OpenLane. The OpenLane menu has a
submenu with the options Graphs and Navigation Wizard.
3. Click on Graphs to display a Real Time Chart.
If the Performance Wizard does not start, do the following:
H
Verify that the correct version of the JRE has been installed and that the
JRE executable has been included in your default path. Refer to
Java Runtime Environment
H
Verify that you are logged in with the correct permissions. Windows requires
Administrator access and UNIX requires root access.
H
Verify that you installed the Performance Wizard in the correct path.
H
Verify that at least 256 colors are available for your display configuration.
H
Verify that Super VGA with a minimum of 800 x 600 resolution is available on
Windows NT and Windows 95. A resolution of 1024 x 768 resolution or
higher is recommended.
Getting Started with OpenLane Performance Wizard
on page 1-4.
May 1999
Installing the
1-15