Assigning Pstn Protection Group Members - Paradyne CPX-1000 User Manual

1000-A2-GB22-10
Assigning PSTN
Protection
Group
Members
Step 1
Step 2
Step 3
June 2005
Before assigning members to the PSTN network Protection Group,
make sure that the CPX-1000 is up with redundant STS-1 cards.
To assign members to the PSTN Protection Group:
Click PSTN PG on the Tree View, the right-hand pane changes
to the PSTN Protection Group tabular view
Right-click these fields and
select Configure
Figure 6–4. PSTN Protection Group Tabular View
Select a PSTN protection group member that you want to assign.
Select Configure from the Configuration menu.
– Or –
Right-click the highlighted selection and select Configure from
the pop-up menu.
The Configuration for PSTN PG window appears
6. Protection Group Provisioning
(Figure 6–4).
(Figure 6–5).
6-5