Paradyne CPX-1000 User Manual page 128

9. IAD Profiles and IADs Provisioning
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
9-18
Figure 9–15. IAD Creation Wizard–IG Selection Screen
Select an Interface Group from the GR-303 Interface Group
drop-down list.
Click Next. The IAD Creation Wizard–ATM Protection Group
Configuration screen appears
Select the Protection Group that the IAD is assigned from the ATM
Protection Group drop-down list.
Type the VPI value between 0 to 255 in the VPI field.
Type the VCI value in the VCI field. This identifies the
subscriber-specific virtual circuit between the CPX-1000 and the
ATM network.
If VPI is 0, then the VCI range is 32 to 1023.
If VPI is >0, then the VCI range is 0 to 1023. (Refer to
Chapter 5, CPX-1000
Select either ATM or Frame Relay from the Transport
drop-down list. Transport selections are dependant upon the IAD
Profile.
Click Next. The Reference Configuration screen appears
(Figure 9–11).
(Figure 9–10).
Configuration, for VCI setting.)
1000-A2-GB22-10
June 2005