Paradyne CPX-1000 User Manual page 70

6. Protection Group Provisioning
Step 4
Step 5
Step 6
Step 7
Step 8
6-6
Figure 6–5. Configuration for PSTN PG Window
Select a slot and port number for the Primary Member from the
Slot/Port drop-down list. Once a port assignment is selected, all
other fields in the area are automatically populated.
Notes
You cannot assign ports that are already members of
some other Protection Group.
Ensure that you assign the same port type to the same
Protection Group.
Select Unlocked from the Admin State drop-down list.
Repeat Step 5 for the Secondary Member.
Select Y-cable.
Click OK. The newly created Protection Group display in the
tabular view (Figure 6–6).
Figure 6–6. Protection Groups Displayed in Tabular
View
1000-A2-GB22-10
June 2005