Cpx Alarms; Setting Alarm Polling Interval - Paradyne CPX-1000 User Manual

1000-A2-GB22-10

CPX Alarms

Setting Alarm
Polling
Interval
Step 1
Step 2
Step 3
June 2005
JetCraft displays current alarms in the Alarm window
on page 9-1). The Alarm window is located above the status bar at
the bottom of the JetCraft Main window.
From the Alarm window, you can sort alarms alphabetically by
selecting a column (Severity, Time, Equipment, and Description).
To sort by another type of alarm information, select another
column. The CPX-1000 maintains a lists of up to 1,000 active
alarms. To view the current alarm summary, select a CPX-1000
component and click
To set an alarm polling interval:
Select Alarm Polling Interval Configuration from the Services
menu. The Alarm Polling Interval Configuration window appears
(Figure 10–3).
Figure 10–3. Alarm Polling Interval Configuration
Type a time interval in the Alarm Polling Interval field.
Note
We recommend setting the polling interval to
15 seconds.
Click OK.
10. Alarms, Events, and Statistics
on the toolbar.
(Figure 9–1
10-3