Oil Pressure Valve Replacement - Kohler KDI 2504TM Workshop Manual

INFORMATION FOR REPLACING THE
6.4.8 Coolant pump assembly
1. Perform the operations described in

6.5 Oil pressure valve replacement

6.5.1 Disassembly
Important
•
Before proceeding with operation, read
1. Undo the cap A.
2. From the crankcase D, remove the spring B.
3. Remove the valve piston C using a magnet.
6.5.2 Assembly
Important
•
Carry out the checks described in
assembly.
•
Always replace the gasket F after each assembly.
1. Lubricate the piston C and fully insert it in the seat E.
2. Insert the spring B in the piston.
3. Mount the gasket F on cap A.
4. Clamp the cap A on the crankcase D (tightening torque
at 50 Nm).
FUNCTIONAL UNITS
Par 6.2.2.
Par. 3.3.2.
Par. 8.7.3 prior to
Fig 6.46
Fig 6.47
6
75
EN