INFORMATION FOR DISASSEMBLY
7.7 Lubrication circuit disassembly
7.7.1 Oil overpressure valve (
1. Undo the cap A.
2. Remove the spring B.
3. Remove the valve piston C using a magnet.
7.7.2 Timing system semi-crankcase oil filling flange (
1. Undo the screws G and remove the oil filling flange E
(ST_06).
2. Remove the gasket F.
7.7.3 Timing system
1. Make sure that the crankshaft with the 1st cylinder is at
TDC.
2. Undo the screws X.
3. Remove the timing system crankcase H.
7.7.4 Oil pump
Important
The oil pump is not repairable.
1. Undo the screws M and remove the pump crankcase N
from the crankcase D (ST_06).
)
Fig 7.13
)
Fig 7.14
Fig 7.15
Fig 7.16
7
85
EN