Kohler KDI 2504TM Workshop Manual page 82

7
7.2.4 Sensors and switches
Important
•
After disassembly, protect the sensors suitably against
knocks, dampness and any high temperature sources.
•
The sensors and switches cannot be repaired, therefore
they must be replaced in the event of anomalies.
7.2.4.1 Oil pressure switch disassembly (
1. Unscrew and remove oil pressure switch H.
7.2.4.2 Coolant temperature sensor (
1. Unscrew and remove the sensor L.
7.2.4.3 Fuel filter water detection sensor (
Warning
•
The fuel filter is not always installed in the engine.
•
When disassembling the sensor M, use a suitable
container to recover the fuel contained in the cartridge
N.
1. Unscrew the sensor M from the cartridge N.
EN 82
INFORMATION FOR DISASSEMBLY
)
)
)
Fig 7.3
Fig 7.4
Fig 7.5