Kohler KDI 2504TM Workshop Manual page 167

INFORMATION ABOUT OPTIONAL
Fig. 11.58
9. Fasten oil sump F by tightening capscrews E and
strictly following the order shown in Fig. 11.59
(tightening torque at 20 Nm).
10. Loosen capscrews A and remove housing or plate
L (Fig. 11.58).
11. Fasten oil sump F by tightening capscrews E and
strictly following the order shown in Fig. 11.59
(tightening torque at 47 Nm).
Loosen the screw 1 again and tighten it to 47 Nm.
12. Insert gaskets N into seats P of bypass tube
D.
13. Fasten bypass tube D onto oil sump F using
capscrews C (tightening torque at 10 Nm).
COMPONENTS
Fig. 11.59
Fig. 11.60
11
167
EN