Kohler KDI 2504TM Workshop Manual page 64

6
6.1.5 Injection pump disassembly
Important
•
Before proceeding with the disassembly,
identify the pump code from its identifying
name plate (Pos. 12 -
•
Alternatively, you can identify the pump
from the online spare parts catalogue
(https://partners.lombardini.it/App/Spare
partCatalogue/Default/Catalogue.aspx).
1. Insert the tool
and fix it with the fixing brace R of the
injector, capscrew P and washer Q.
NOTE : Do not tighten the capscrew P.
2. Disassemble the starter motor.
3. Mount the tool
starter motor Y and fit it with the two starter
motor fixing screws.
4. Rotate the crankshaft clockwise
bringing reference X upwards.
NOTE: During the positioning phase of reference X,
check that cylinder N° 1 is in compression phase
(intake and exhaust valves of cylinder N° 1 must be
in closing position).
Fig 6.10
Tab. 6.1
PUMPCODE
ED0065900040-S
ED0065905050-S
ED0065905110-S
ED0065905350-S
ED0065905470-S
ED0065905480-S
ED0065905490-S
EN 64
INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
Tab. 2.12).
ST_30 into the injector N°1
ST_34 in the seat of the
ST_34
PISTON
ADVANCE α
LOWERING
(mm)
1,695 13°
1,695 13°
1,963 14°
1,963 14°
1,695 13°
1,963 14°
0,363 6°
Fig 6.8
tool
Fig 6.9