Electric System - Kohler KDI 2504TM Workshop Manual

2.13 Electric system

2.13.1 Engine electrical wiring (opzional)
NOTE : Component not necessarily supplied by KOHLER.
Electrical wiring is supplied upon request, it interfaces with the
panel by means of 19-way Deutsch connectors (female on
engine panel - male on accessories panel).
The connectors are described in Tab. 2.30.
Fig 2.25
TECHNICAL INFORMATION
Tab 2.30
REF. DESCRIPTION
Engine panel connector
1
interface (Fig. 2.26a)
Accessories panel
2 connector interface (Fig.
2.26b)
Electrical fuel pump
3
connector
Cold Start Advance
4 connector (on injection
pump - Fig. 2.39)
5 Fuse connector
Electro-Stop connector (on
6
injection pump)
"L" alternator connector
7
(Iskra)
"W" alternator connectors
8
(Iskra)
Alternator connector
9
without "W" (Chengdu)
Alternator connector with
10
"W" (Chengdu)
Coolant temperature
11
sensor connector
Coolant temperature
12
sensor connector
Starter motor connector "+
13
50"
Starter motor connector "+
14
30"
Air cleaner clogging sensor
15
connector
16 Earth connector
2
33
EN