Kohler KDI 2504TM Workshop Manual page 91

INFORMATION FOR DISASSEMBLY
7.12.1.1 Rocker arm (
1. Remove the retainer snap ring C.
2. Remove the shoulder rings D.
3. Remove the rocker arms E and springs.
7.12.2 Rods and u-bolts
1. Remove the valve control U-bolts H.
2. Remove the rocker arm control rods L.
7.12.3 Cylinder head
Important
•
Wait for the engine to reach ambient temperature
before to remove the head in order to prevent
deforming.
•
The cylinder head fastening bolts M must be replaced
every time they are disassembled.
1. Undo the bolts M.
2. Remove the cylinder head N.
Important
• Only use the eyebolts AE installed by KOHLER to move the
cylinder head Q.
3. Remove the head gasket P.
)
Fig 7.31
Fig 7.33
Fig 7.34
Fig 7.35
7
91
EN