Kohler KDI 2504TM Workshop Manual page 12

1
This paragraph illustrates all external components
that are present in the base configuration of the
engine.
For components present on engines that differ from
those represented in these illustrations, refer to
Chap. 11.
Tab 1.2
POS. DESCRIPTION
1 Oil filler cap
2 Oil pressure switch
3 Starter motor
4 Oil drain plug
5 Engine identification name plate
6 Alternator
7 Coolant pump
8 Coolant temperature sensor
9 Oil filler cap side
10 Thermostatic valve
11 High-pressure fuel injection pump
12 Lub. oil filter
13 Oil dipstick
14 Fuel filter
15
Crankshaft pulley (2
16
Flywheel (1
17 Intake manifold
UPPER VIEW
Fig 1.9
EN 12
GENERAL INFORMATION
nd
PTO)
st
PTO)
NOTE: The illustrated components may differ from
those illustrated; the illustration is only as an
example.
POS. DESCRIPTION
18 Exhaust manifold
19 Flange bell
20 Injectors
21 Turbocharger
22 Oil steam separator
23 Oil Cooler
24 Waste Gate valve control actuator
25 Air intake hose