Kohler KDI 2504TM Workshop Manual page 164

11
5. Undo the screws D and remove the plate E and the pin
F.
6. Undo the screws G and H remove the alternator L.
7. Undo the screws M and remove the bracket N.
11.4.2 Assembly
1. Secure the bracket N using the screws M on the cylinder
head P (tightening torque at 25 Nm).
EN 164
INFORMATION ABOUT OPTIONAL
COMPONENTS
Fig 11.46
Fig 11.47
Fig 11.48
Fig 11.49