Kohler KDI 2504TM Workshop Manual page 96

7
7.14.3 Lower semi-crankcase
1. Undo capscrews E and F by following the order
indicated in the figure.
2. Remove the lower semi-crankcase D and store it in a
suitable container for washing.
7.14.4 Crankshaft
Remove:
1. Crankshaft G.
2. The four shoulder semi-rings H.
7.14.5 Piston (
1. Remove the retainer ring N.
2. Remove the pin P to separate the piston Q from the
connecting rod R.
Important
•
If they are not replaced, keep the components together
(connecting rod - piston - gudgeon pin) by using
references in order to prevent them from getting mixed
up during assembly.
EN 96
INFORMATION FOR DISASSEMBLY
)
Fig 7.49
Fig 7.51
Fig 7.52