10 FLUIDS FILLING INFORMATION
10.1 Engine oil
Important
•
Before proceeding with operation, read
Par.
3.3.2.
•
Do not use the engine with the oil level
below the minimum.
1. Loosen the oil filler cap A or the oil filler
cap C if the cap A is not accessible.
2. Add the type and amount of oil
recommended
(Tab.
3. Remove the oil dipstick B and check that
the level is up to but does not exceed the
MAX.
4. If the oil level is not at MAX, insert more
oil until the MAX level is reached as
indicated on the dipstick.
5. Re-tighten the cap A or C.
NOTE: See the
Par. 11.1
configurations of the oil dipstick.
NOTE: Click on the right to play the procedure.
FLUIDS FILLING INFORMATION
2.2).
for the various
Fig 10.1
Fig 10.2
https://www.youtube.com/embed/A5WuDZuItu4?rel=0
10
147
EN