Oil Filter Cartridge Replacement - Kohler KDI 3404TM Operation And Maintenance Manual

INFORMATION ABOUT REPLACEMENTS

6.2 Oil filter cartridge replacement

Important
• Before proceeding with operation, read
Warning
• Electric/pneumatic screwdrivers are forbidden.
• In case of low use replace il 12 months.
•
For disposal of oil filter cartridge and fuel filter refer to
DISPOSAL and SCRAPPING.
1. Unscrew cartridge holder cover A by performing three
complete turns and wait 1 minute..
NOTE : this operation allows to oil contained in the support F to flow
into the oil sump in the correct way.
2. Unscrew cartridge holder cover A and check that the oil in the
lub. oil filter support F has flowed towards the oil sump.
3. Remove the cap A as well as the oil cartridge B from the oil filter
support.
4. Remove and replace the oil cartridge B with a new one.
Remove and replace the gaskets C, D and E with new ones.
5. Fit and tighten the cover A on the oil filter support F, tightening
it with a torque wrench G (tightening torque of 25 Nm).
NOTE: Click on the right to play the procedure.
Internal Communication: For internal & partner use only.
Par. 3.2.2
Par. 6.5
6
Fig 6.5
Fig 6.6
Fig 6.7
https://youtu.be/lGMrGAceKXE
39
EN