Kohler KDI 2504TM Workshop Manual page 68

6
3. Assemble the parts P, Q, R and fit the parts so
assembled on the injector Z.
4. Insert tool ST_51
(detail X1).
5. Tighten the screw P (tightening torque to 20 Nm)
6.1.8 Assembly of the injector return pipes
1. Position the tube N on the injectors Z, and
tighten screws M (tightening torque to 14
Nm).
EN 68
INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
on the injectors junctions Z
Fig 6.22
Fig 6.23
Fig 6.24